I've been involved with a couple of streamliners where the front wheels are in
the inline configuration. Rich Manchen will build in the Ackerman. The short
tread dimension will cause the outside front wheel to lift without it.
DW
ddahlgren@snet.net wrote:
Be careful putting one tire straight if your front suspention has
ackerman in the steering. ( the inside front wheel turns more than the
outside front wheel in a corner. Then it is much safer to set the wheels
so the gap measurement is the same or close to it on both sudes to get a
more accurate measurment. Normally you would not need any ackerman in a
race car for LSR as there is no intentional cornering at anything over 5
or 10 mph..
Dave
-----Original Message-----
From: land-speed-bounces@autox.team.net
[mailto:land-speed-bounces@autox.team.net] On Behalf Of Keith Turk
Sent: Friday, July 06, 2007 7:02 AM
To: smsandimas@earthlink.net; landspeed list
Subject: Re: [Land-speed] TOE IN
I've always stated that as a total of 1/8th" toe in... check this
thought
out... ( thanks to Dahlgren )
normally your front track is slightly less then your rear... so if you
take
one front tire and measure it exactly even... the other wheel should
indicate the exact toe in.
Keith
Version: 7.5.467 / Virus Database: 269.9.14/884 - Release Date: 7/2/2007
3:35 PM
_______________________________________________
dwarner230@yahoo.com
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
Started 62nd, first to finish - PRC Reliability Run '07
---------------------------------
Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel
and lay it on us.
_______________________________________________
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|