I agree Neil but I wasn't going after HP gains. My goal is to move
the oil more efficiently (which I should do with or without a dry
sump system), and shed some heat by quickly dumping the oil into the
pan and also eliminate some foam if possible. I don't need the HP
gains but do need to maximize the engine life.
Skip
At 03:21 PM 10/18/2006, Albaugh, Neil wrote:
>Skip;
>
>True in theory but the HRM tests didn't show any significant BHP
>improvement with oil- shedding coatings. As Dave will probably say-- go
>dry sump for significant BHP gains.
>
>Regards, Neil Tucson, AZ
|