Re: Spindle Torque (was Things to do---)

[Bryan Savage <b.a.savage@wildblue.net>]

Just remember Elon, If they are too loose the car will drift around a bit.
If they are too tight, the spindle will come off and scratch the paint.

Bryan

3 liter wrote:
> You bring up a good point Sparky.  List. . . what is the correct amount of
> preload for the front spindle bearings? If not a torque number then what
> favorite procedure do you use?  Also, what wheel bearing lube is best for
> the salt?
> 
>   -Elon