Dick,
I always put the filter > Before < the regulator to keep crud
out of the regulator parts. I would put both filters in Parallel
between the pump and the regulator. The filters work better
when the flow in reduced.
Bryan
Dick J wrote:
> OK, Mayf, I'll try to generate some activity.
>
> What kind of fuel filter to use? I've got two of the chassis mount filters
>that look like remote oil filters. I was going to mount one on the firewall
>with the 1/2 fuel line from the pump feeding into it, then run a 1/2" line to
>the pressure regulator, and two 3/8" lines from the regulator, one to each
>float bowl on the Holley.
>
> The other alternative was to run the 1/2" line directly into the regulator,
>and two 3/8" lines out, each with an in-line filter, to each of the float
>bowls.
>
> Any comments?
>
> BTW, Holley says that their regular one into two fuel lines is adequate to
>feed the 1000 cfm carb. Any thoughts on that? One line to the carb or one
>line to each float bowl?
>
> Dick J
> In east Texas
|