I spoke with a Holley Tech Rep for a while this morning, and he said that my
454, at sustained 7000 RPM, would require 919 CFM and he recommended a 1000 CFM
carb.Now my question is, how much gas will it need. I know some of you guys
are running real exotic fuel pumps, but I already have a Holley blue pump and
regulator which flows about 70gph to the motor at 14psi which should be enough
pump.
My question is: Will the stock 3/8" fuel line flow well enough to feed this
motor?
Dick J
In East Texas
---------------------------------
Yahoo! Mail for Mobile
Take Yahoo! Mail with you! Check email on your mobile phone.
|