.....so is that what Keith has been using?.....
Joe :)
Quoting Dave Dahlgren <ddahlgren@snet.net>:
> What else does it 'lase' in the process.. better focus good or it is piston
> time..
> Dave
>
> > -----Original Message-----
> > From: owner-land-speed@autox.team.net
> > [mailto:owner-land-speed@autox.team.net]On Behalf Of Bryan Savage
> > Sent: Tuesday, February 22, 2005 3:56 PM
> > To: List Land Speed
> > Subject: Laser Ignition
> >
> >
> > OK Keith, here's one...
> >
> > I just ordered two SAE papers:
> >
> > 2005-01-0248
> > An Extensive Comparison of Laser-Induced Plasma Ignition and
> > Conventional Spark Plug Ignition of Lean Methane-Air Mixtures
> > Under Engine Like Conditions.
> >
> > 2005-01-0129
> > Optical Diagnostics of Laser-Induced and Spark Plug Assisted
> > HCCI Combustion.
> >
> > What would happen if a Laser could sweep a 30 degree arc of the
> > combustion chamber igniting 50% of the mixture in 1 crankshaft
> > degree (or less) at 10,000 RPM ?
> >
> > Well..??
> >
> > Bryan
>
>
-------------------------------------------------
This mail sent by http://webmail.rushmore.com
|