No I was pointing out why the stiffness is not the only consideration. When
I looked at the material choices one of the things I gave some consideration
to was the yield strength for the button to pull through the panel. hence my
opinion that the material is of some consideration. When ever I make an
engineering decision I always test my reasoning by examining the extremes to
see if what I believe to be true will provide logical results at both
extremes along with the set of conditions I am working with. Call it a plot
of the reasonability of the solution if you like.
Dave
> -----Original Message-----
> From: owner-land-speed@Autox.Team.Net
> [mailto:owner-land-speed@Autox.Team.Net]On Behalf Of John Burk
> Sent: Tuesday, December 28, 2004 3:34 PM
> To: land-speed@Autox.Team.Net
> Subject: Re: Dzus Spacing
>
>
> Dave - So you're saying one button per .95 sq. ft. is not enough
> and that I
> should have twice as many of them ? 32 Dzus buttons in a 96" panel seems
> aerodynamicly costly .
|