there are brackets that bolt to a holley carb available
kinsler has some that will fit both their injection as well as hilborn and
others
yes you could measure ride height and ifer downforce as well
Don't forget for any of these setups you need to provide your own regulated
5 volts and the sample rate is 12 per second so don't expect to get shock
data from them.
Dave
> -----Original Message-----
> From: owner-land-speed@autox.team.net
> [mailto:owner-land-speed@autox.team.net]On Behalf Of John Beckett
> Sent: Monday, July 12, 2004 9:42 AM
> To: Dave Dahlgren; Landspeed List
> Subject: Re: Data Acq and high cost of electronics
>
>
> What is the best way to add TPS to a Carb or Hilborn system? Would it be
> possible to add two sensors to the suspension to measure down force
> adequately?
>
> JB
> ----- Original Message -----
> From: "Dave Dahlgren" <ddahlgren@snet.net>
> To: "John Beckett" <saltracer@servusa.com>; "Landspeed List"
> <land-speed@autox.team.net>
> Sent: Monday, July 12, 2004 5:33 AM
> Subject: RE: Data Acq and high cost of electronics
>
>
> > Yes it will log rpm and 4 other analog channels at 0-5 volts of your
> > choosing and configuration. To do this it does require an expander worth
> > around 100.00 so you are up to 450.00 plus shipping if you want
> the other
> > channels besides O2. I would pick TPS and Map as 2 if I were concerned
> about
> > engine stuff. still leaves 2 more. It also has 2 analog outputs
> as well if
> > you want to interface into an existing data acq system or run
> it on a car
> > that needs an input from an O2 sensor as well. For what little
> this thing
> > costs and how well it works it seems like a good deal to me.
> Ideally if we
> > can get 5 people that want one I will see what I can do to set
> up a group
> > buy of 5 systems and everyone saves some money. BTW new sensors at full
> > retail are only $59.00 as well.
> > Dave
|