Tony,
Sorry Tony for Volkswagen there is more to it then that. And most vehicles
you cant run off the ground on Jack Stands sets abs codes or engine codes.
If all wheels and vss dont compute can abort programming and relearn
procedures. And no MT2500 wont let you do it on Volkswagen cause those
features a vehicle specific (must use a VAG tool) and not obd II generic.
OBD II generic will only let you view data stream, freeze frame and codes,
and clear mem.
Most of the time to do relearn correctly you must activate thru a scanner on
vehicles other then Volks and Audi. Over time vehicle will learn driving
conditions which can take several weeks, until then vehicles can run
sluggish until the relearn conditions are met.
Jonathan
----- Original Message -----
From: <RACE427@aol.com>
To: <docb8532@aol.com>; <land-speed@autox.team.net>
Sent: Wednesday, January 28, 2004 7:56 PM
Subject: Snap On Scanners
> Jon,
>
> You should be able to learn your idle speed by just letting the engine
run
> while going through the gears. You could probably do this on jackstands.
I
> do not believe the Snap On MT 2500 can do this for you. I can check if
you
> wnat me to. Tony Greco LI,NY
|