Phillip
I know they narrow Pinto racks, have seen them at a few swap meets, but you
have to find someone who can re-machine the right side on the rack after you
cut off the excess end. As for the housing tube you can cut out the excess
from the middle, re-align and weld back together. Ratio is probably somewhat
slower than a Fiero too.
JB
----- Original Message -----
From: "Dave Dahlgren" <ddahlgren@snet.net>
To: "Phillip Landry" <saltracer@hotmail.com>; <land-speed@autox.team.net>
Sent: Monday, January 26, 2004 4:35 AM
Subject: RE: Fiero Rack Disassembly
> If memory serves me right if you narrow it you will lose the outer
bearings
> and nothing will support the rack. If it is a GT rack the ratio will be
very
> fast as well more suited for autocross than LSR. I have an '87 GT and at
> freeway speeds and up have never turned the wheel more than a couple of
> degrees to make abrupt lane changes. If you do a web search on Fiero you
> will find a lot of links and newsgroups as well.
> You might try these links..
>
> http://www.v8archie.com/fiero-technet.html
> fiero-technet@topica.com
> Dave
|