That will work great if they are in inches of Hg and/or psia, and degrees F.
The only times I have been there and looked at the board the data was
density altitude, temperature, horsepower correction factor and was not
updated very often. So if they have the data and I can get it when I need
it, cool. I will park in the spectator area, make friction data runs, get
the ERC data and make calculations. Rough Science... I had planned on
parking around Ed Van Scoy's or Keith's pit and testing there with the beer
but I can do it at the ERC trailer as well. Beer will be where ever Dave
Dahlgren is, I'll just leave it with him. So you had better hurry if you
want one...
mayf
----- Original Message -----
From: "Dan Warner" <dwarner@electrorent.com>
To: "land speed" <land-speed@autox.team.net>
Sent: Wednesday, August 13, 2003 5:24 AM
Subject: Request
> I want absolute pressure in psia and temp in deg f.
> If it can do that and I can be assured of getting the data then I would be
> thrilled.
> ***************
> What about the readings posted at the ERC truck?
>
> DW
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive
|