That would actually reduce the fuel flow. The injectors have an opening time
that ranges from 0.75 ms to 1.5 ms. Now you have to open them twice. To make the
math easy at 6000 rpm there are 10 ms. per rev. If you open the injector once
you lose the 0.75 once. if you open it twice it cost you 1.5 instead of 0.75 ms.
For a 7.5% reduction in fuel flow. Injectors are sized by hp not cubic inches.
How much power does the engine make and at what rpm?? What is the port layout?
Siamesed intakes or one for each cylinder?
Dave
Richard Fox wrote:
>
> If the injector gets one of the signals about how much fuel to squirt, and
> rice burners turn at least twice as fast as my Ply. Can I belt drive my crank
> speed sender at twice, or other, crank speed to increase my fuel flow?
> In pounds per hour Rick must burn more fuel than I do. He just isn't out there
> as long as I am. Rich Fox
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive
|