There are a lot of good products and Wiggins is at the top. Main thing with
Quick disconnects and other o-rings is to be sure the rubber compound is
compatable with the fluid you will be using them with. Most of the companies
are on line and very helpful with our needs. Finding a good surplus store is
a must for rare parts an fittings.
Glen
----- Original Message -----
From: "Albaugh, Neil" <albaugh_neil@ti.com>
To: "'Dave Dahlgren'" <ddahlgren@snet.net>; "'Glen Barrett'"
<speedtimer@charter.net>
Cc: "'Joe Timney'" <joetimney@dol.net>; "'Tom Neimeyer'"
<tneimeyer@houston.rr.com>; "'Land-speed List'" <land-speed@autox.team.net>
Sent: Wednesday, March 19, 2003 1:19 PM
Subject: RE: Threaded Fittings
> Dave;
>
> I scrounged up a couple of Wiggins quick-release fluid line fittings and,
> based on those, I'll certainly agree with you-- Wiggins makes really high
> quality stuff.
>
> Regards, Neil Tucson, AZ
>
>
> -----Original Message-----
> From: Dave Dahlgren [mailto:ddahlgren@snet.net]
> Sent: Wednesday, March 19, 2003 1:32 PM
> To: Glen Barrett
> Cc: Joe Timney; Tom Neimeyer; Land-speed List
> Subject: Re: Threaded Fittings
>
>
> Have you used the wiggins clamps they are the best deal for oil water and
> air lines I have seen to date Large sizes are available and need no
wrenches
> to work with them very slick part and priced accordingly.. Dave
>
> Glen Barrett wrote:
> >
> > Dave
> > I agree they are the standard, I have used them for many years as the
> > local supplier is Nelson & Dunn in Los Angeles. Quality product and
> > good service.
> >
> > Glen
> > ----- Original Message -----
> > From: "Dave Dahlgren" <ddahlgren@snet.net>
> > To: "Glen Barrett" <speedtimer@charter.net>
> > Cc: "Joe Timney" <joetimney@dol.net>; "Tom Neimeyer"
> > <tneimeyer@houston.rr.com>; "Land-speed List"
> > <land-speed@autox.team.net>
> > Sent: Wednesday, March 19, 2003 11:30 AM
> > Subject: Re: Threaded Fittings
> >
> > > I always thought they were the standard that everything else is
> > > compared
> > to..
> > > Along with wiggins clamps.. pricey but very nice as well. Dave
> > >
> > > Glen Barrett wrote:
> > > >
> > > > Aeroquip has an high perfomance racing catalog with all of the AN
> > > > and special fittings needed for the racer. AIRCRAFT quality.
> > > > Glen
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
/// what is needed. It isn't that difficult, folks.
|