Are you sure the rods are Carrillo or just look like them vastly different
deal.
Some companies are having Carrillo look alikes made in the orient..
What type of cam ? solid ,hydrulic or roller..
What is the valve spring tension vs rpm from the data logger..
What do you mean by the lifter bottom being punched out..
Dave
Keith Turk wrote:
>
> The last thing that might help us solve this mystery is that the push rods
> are straight as an arrow.... but Many of the lifter have the bottoms punched
> out of them..... so I suppose it's possible that a lifter failed and stuck
> the cam..... From initial inspection it's hard to see but it looks like
> only 3 of the valves actually hit a piston when the cam quit moving....
>
> Keith
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
/// what is needed. It isn't that difficult, folks.
|