MT tires recomends for 16" wheels 4"-5.5" 18" wheels 5"-7"
---- Original Message ----
From: Allen Young
Date: Thu 2/7/02 1:07
To: landspeedracer, Dave Dahlgren, land-speed@autox.team.net
Subject: Re: lakester steel rear wheels
John,
What is a better wheel width for an LSR application? How narrow should one
go?
Allen
----- Original Message -----
From: "landspeedracer" <landspeedracer@msn.com>
To: "Dave Dahlgren" <ddahlgren@snet.net>; <land-speed@autox.team.net>;
"Allen" <riveroak@cncnet.com>
Sent: Wednesday, February 06, 2002 2:07 PM
Subject: Re: lakester steel rear wheels
> Most circle track wheels are from 8 to 10 inchs wide. Are you going to run
> tires that wide?
>
> John
> ----- Original Message -----
> From: "Dave Dahlgren" <ddahlgren@snet.net>
> To: <land-speed@autox.team.net>
> Sent: Wednesday, February 06, 2002 1:13 PM
> Subject: Re: lakester steel rear wheels
>
>
> > you might ask them about inflation pressure limits as circle track cars
> for the
> > most part run a lot less air pressure in the tires..
> > Dave
> >
> > Allen Young wrote:
> >
> > > List,
> > >
> > > I'm in the process of getting the rear wheels for my
> lakester-in-process.
> > > Does anyone know of or had any experience with the BART racing wheels
as
> sold
> > > through the Summit catalog? They are billed as "circle track" wheels.
> Steel,
> > > full 360 degree welded and fairly inexpensive. Are these suitable for
> my
> > > application? If not, any suggestions?
> > >
> > > Allen in Oroville
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
///
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
|