Dave, the "Lectron" is the "Fast By Gast" carb of Pauls.
Sort of Pauls, it came on two strokes a few years ago,
he simply picked up on it again, Vesco ran them on many
of his machines. They are truly the poor mans EFI,
the set I got came off of a 1500cc plus 275 hp NA
motor, when I called Paul to find out were I should
set the metering rod length for a baseline on my 998cc
motor, he said
"didnt they work on the bike they came off of", I said
yes, and on they went, they carburate perfectly,
how is that for compensation?
Joe :)
Marge and/or Dave Thomssen wrote:
> Joe
> Paul Gast makes a carb for the pro stock motorcycles that does the same
> thing, now that you mention it. None of the scooter racers have to change
> jets at all.
>
> Dave the Hayseed
>
> ----- Original Message -----
> From: Joe Amo <jkamo@rapidnet.com>
> To: Dave Dahlgren <ddahlgren@snet.net>
> Cc: Marge and/or Dave Thomssen <mdthom@radiks.net>; Land-speed Racers
> <land-speed@autox.team.net>
> Sent: Saturday, June 16, 2001 2:28 AM
> Subject: Re: Fw: Hilborn v. carbs
>
> Mine do Dave, you can borrow them, they are
> Lectron (brand name), a flat slide carb with a tapered metering
> rod, no jets, yes they compensate
> for air density, dont need no electronics, dont need
> no high falootin fuel system, its all natural, self compensating,
> the dyno and the timing system dont lie, ask ANY motorcycle
> prostocker (or 90% of any at the dragstrip, or wanna be me)
> Joe :)
>
> Dave Dahlgren wrote:
>
> > Then what is with all the jets for changing things?? You mean to tell me
> that a
> > Holley or carter carb will need no jet correction to run at 4000 ft and
> 110
> > degrees instead of sea level and 60 degrees.. Sure wish i had one of those
> !
> > Dave
> >
> > Marge and/or Dave Thomssen wrote:
> > >
> > > And the answer is: any brand but Stromberg!
> > >
> > > ----- Original Message -----
> > > From: Dave Dahlgren <ddahlgren@snet.net>
> > > To: Marge and/or Dave Thomssen <mdthom@radiks.net>
> > > Cc: Land-speed Racers <land-speed@autox.team.net>
> > > Sent: Saturday, June 16, 2001 5:20 AM
> > > Subject: Re: Hilborn v. carbs
> > >
> > > And the brand carb that will make air density changes is?
> > > Dave Dahlgren
> > >
> > > Marge and/or Dave Thomssen wrote:
> > > >
> > > > Bill
> > > >
> > > > I think the major difference between a Hilborn and a carb is the
> modern
> > > carb
> > > > (not a 97) automatically adjusts for changes in air density (within
> > > limits)
> > > > and the Hilborn relies on you to change the pill. If you get the pill
> > > > wrong, the carb out-powers the Hilborn. EFI is one step better, it
> > > > automatically adjusts everything. CFM aside, Hilborn trumps carb and
> EFI
> > > > trumps Hilborn just because of the fineness of the spray(liquid fuel
> does
> > > > not burn, only vapor). Having done it, I have to say that tuning an
> engine
> > > > equipped with 97's was the biggest challenge, but I like my Holly 750.
> > > > Dave the hayseed
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
///
|