land-speed
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Additives

from [Flowbench] [Permanent Link][Original]
To: kturk@ala.net, tschoen@fuse.net, saltrat@pro-blend.com
Subject: Re: Additives
From: Flowbench@aol.com
Date: Wed, 10 Jan 2001 21:08:27 EST 
I do not worry about "break in" on the dyno unless it has a flat tappet cam. 
Otherwise I run in the motor to stabilize the temps and shut down to lash 
valves, etc. Restart and destabilize again and pull the handle. Make changes 
or adjustments as required.

                                        Mitech Mike
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Additives, Flowbench
Next by Date:  Re: Additives, Ed Van Scoy
Previous by Thread:  Re: Additives, Flowbench
Next by Thread:  Re: Additives, Ed Van Scoy
Indexes:  [Date] [Thread] [Top] [All Lists]