Joe
Thanks for the reply. When is a good time to call, day? evening?
Rich
Joe Timney wrote:
> Rich,
>
> The Axle flange off-set ( The distance from the outside of the axle to the
> housing flange ) for a 9" ford is 2.5 " You have to add .125 a side for drum
> brakes or .250" a side for disc hats. If you have any further questions,
> give me a call at 302 378 3013.
>
> joe
>
> Richard Kensicki wrote:
>
> > I have an empty Ford 9" rear housing that will have to be narrowed but
> > I don't have any axles on hand and need a measurement. I'm hoping
> > someone on the list can give me the info. What I need is the measurement
> > from the face of the axle flange to the face of the housing flange. I
> > came up with a figure of 2.175 and need to know if it's right, and if it
> > varies. Am I even close with this number?
> >
> > Thanks in advance
> > Rich
|