Exactly the same advice you gave me last time... and I totally agree..... K
----------
> From: John Beckett <johnbeck@blueridge.cc.nc.us>
> To: Keith Turk <kturk@ala.net>; land-speed@autox.team.net
> Subject: Re: Rear ends
> Date: Wednesday, June 23, 1999 12:16 PM
>
> Hey, ran a spool at 231 MPH with no problem. Maybe it you had the $ a
> locker might be the best of both worlds.
>
> JB
>
>
> At 12:29 PM 6/23/99 -0500, Keith Turk wrote:
> >I am just following John Beckett's advice here (sorta) I spooled all my
> >gear sets so I could swap them out with ease... Takes about 25 min to
> >change a rear gear in a 9" ford.... simple clean easy and neat..
> >
> >I also went to the Rubber gasket that doesn't require any cleaning of
> >Silicone.... so the swap is pretty simple...
> >
> >I am not running hardened axles so turns at Maxton on Concrete have to
be
> >made as wide as possible to prevent any added stress on the axles... I
am
> >pretty sure of this set up for the salt.. but we'll see
> >
> >Keith Turk
> >Austin Healey 100, Bugeye, Box sprites, Bonneville Camaro ( Land Speed
> >Racer)
> >
>
>
|