I have everything on a chart. TDC, do eight valves turn it 360 degrees
and
do the other eight. But your right its got to be acurate, except that full
turn can be hard with 13 to 1 compression.
JB
At 09:38 AM 3/3/99 -0800, you wrote:
>except a wrench if a little more accurate.
>
>-----Original Message-----
>From: John Beckett <johnbeck@blueridge.cc.nc.us>
>To: Keith Turk <kturk@ala.net>
>Cc: land-speed@autox.team.net <land-speed@autox.team.net>
>Date: Wednesday, March 03, 1999 6:31 AM
>Subject: Re: starter buttons
>
>
>> Well there is always a big wrench you can put on the crank, but I like
>>your idea better.
>>
>>JB
>>
>>At 05:41 AM 3/3/99 -0800, you wrote:
>>>With the advent of the Roller cam this outing... I am going to have to
>>>start adjusting the valves... Saw a neat set up years ago and I am going
>to
>>>do the exact same thing... it was just to slick... Rather then have
>someone
>>>in the car bump it over to check the next valve... I am going to mount to
>>>weather resistant starter buttons on the fire wall... one on each side of
>>>the motor... that way I can bump it and adjust all on my own if need be...
>>>
>>>total cost... to include wire less then 20 bucks...
>>>
>>>Seem Reasonable?
>>>
>>>Keith Turk
>>>Austin Healey 100 / Bugeye / Box Sprite / Bonneville Land Speed Racer
>>>Camaro ( D Gas Altered )
>>>
>>
>>
>>
>
|