David,
What size ball end mill is needed and how is it aligned in the bore?
John Spaur
-----Original Message-----
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of Bob Haskell
Sent: Sunday, September 4, 2022 10:12 AM
To: David Nock <healeydoc@gmail.com>; Joseph Costa <healey53@gmail.com>
Cc: Healeys at Autox <healeys@autox.team.net>
Subject: Re: [Healeys] Overdrive Piston Rings
David,
How do you cut a new seat? Ball end mill?
Cheers,
Bob Haskell
Austin Healey 3000 BN7/BT7 registrar
On 9/4/22 12:16 PM, David Nock wrote:
> The wide rings are expander rings and go first. Then the narrow rings go on.
> Do you have the pump out. If so take a close looks at the ball seat. They
> usually wear on one side, and will need to have a new seat cut so the check
> ball seats good on the pump body.
> This is a common problem causing low Previn the overdrive
>
> David Nock
>
> Sent from my iPhone
>
>> On Sep 4, 2022, at 8:58 AM, Joseph Costa via Healeys
>> <healeys@autox.team.net> wrote:
>>
>> 
>> I have the larger overdrive piston from BCS -note to John many thanks for
>> getting it here Friday - I have 4 thin rings and 2 larger rings. Do the
>> larger rings go on first and then the thinner over them. I assume I should
>> space them as piston rings are spaced.
>>
>> Second, I have a new spring and ball for the pump. The springs are the same
>> length but the new spring has fewer coils. Which is the better option to
>> use?
>>
>> TIA
>> Joe
>> BN1 #923
>> 100M
>> BJ8
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html Suggested annual
>> donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com
>>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual
> donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html Suggested annual donation
$12.75
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|