I used a version of the stud welding, A stud with a ring through which I
used a long bar against a piece of wood levered most dents out with good
control.
John
64/66 BJ8s
On 1/1/2022 11:08 PM, Michael Salter via Healeys wrote:
> The BN2 that I'm restoring has, unfortunately, been jacked up a couple
> of times with equipment that has dented the bottom of the frame. IÂ
> would like to correct this.
> I've heard of welding studs on and using a slide hammer and drilling
> hole(s) in the upper surface and using a long punch then welding up
> the holes.
> Anyone know of a better method for this?
> I'm reasonably proficient with a TIG welder.
>
> M
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|