--===============6460336572277146198==
--000000000000a6d8e705ba2656d5
I selected this PCV valve.
Standard Motor Products V408 PCV Valve
Mostly because it is designed for horizontal installation and has no
plastic in it.
M
<https://www.amazon.ca/gp/aw/d/B001DCC1JC?psc=1&ref=ppx_pop_mob_ap_asin_image&tag=mshop-android-rogers-all-all-all-pre-ca-20#>
1. [image: Standard Motor Products V408 PCV Valve]
<https://www.amazon.ca/gp/aw/d/B001DCC1JC?psc=1&ref=ppx_pop_mob_ap_asin_image&tag=mshop-android-rogers-all-all-all-pre-ca-20#>
2.
<https://www.amazon.ca/gp/aw/d/B001DCC1JC?psc=1&ref=ppx_pop_mob_ap_asin_image&tag=mshop-android-rogers-all-all-all-pre-ca-20#>
-
On Sat., Jan. 30, 2021, 5:46 p.m. Bob Spidell, <bspidell@comcast.net> wrote:
> Looks clean, Michael. I am considering similar for my BN2 (but I plan to
> fab a plate with an elbow to replace the road draft tube). If you plug
> the valve cover vent, you'll have a 'system' similar to what I have on
> my BJ8, which is an updated version of the original Norman Nock design.
> This isn't really a PCV system, as the crankcase and valve cover will be
> under continuous vacuum. I suspect some air is drawn in from the rear
> 'seal,' which is not filtered but helps to alleviate the infamous Healey
> bellhousing drip, and likely doesn't affect mixture all that much. If
> you leave the vent open--I'd put an air filter on it--you'll have a
> genuine PCV system as air will be constantly circulated through the
> crankcase and top end. This is what I plan to do, but my 100M is vented
> to the CAB, for which I have a large K&N filter on the intake duct in
> front of the radiator.
>
> Which PCV valve did you select?
>
> Bob
>
>
>
> On 1/30/2021 12:20 PM, Michael Salter wrote:
> > After months of deliberation I have constructed this PCV system for my
> > BN1.
> > The original road draft tube has been plugged just below the PCV valve
> > takeoff.
> > Of importance was that the system would be almost impossible to see
> > without very close inspection.
> > I'm still trying to decide if I should plug the normal valve cover
> > vent or leave it open to serve as the PCV system intake.
> > Thoughts?
> >
> > M
> >
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
--000000000000a6d8e705ba2656d5
Content-Transfer-Encoding: quoted-printable
<div dir=3D"auto">I selected this PCV valve.<div dir=3D"auto"><span style=
=3D"color:rgb(15,17,17);font-family:"amazon ember",arial,sans-ser=
if;font-size:15px;background-color:rgb(255,255,255);line-height:0!important=
"><div style=3D"margin-bottom:0px"><h1 style=3D"padding:0px;margin:0px;font=
-weight:400!important;font-size:1.3rem!important;line-height:1.4!important;=
color:rgb(86,89,89)!important"><span style=3D"font-size:1.3rem!important;li=
ne-height:1.4!important;padding-bottom:0px">Standard Motor Products V408 PC=
V Valve</span></h1></div></span><span style=3D"color:rgb(15,17,17);font-fam=
ily:"amazon ember",arial,sans-serif;font-size:15px;background-col=
or:rgb(255,255,255)"></span><div style=3D"margin-bottom:1.3rem;color:rgb(15=
,17,17);font-family:"amazon ember",arial,sans-serif;font-size:15p=
x;background-color:rgb(255,255,255)" dir=3D"auto"><div style=3D"margin-bott=
om:1.3rem"><div>Mostly because it is designed for horizontal installation a=
nd has no plastic in it.</div><div dir=3D"auto"><br></div><div dir=3D"auto"=
>M<br><a href=3D"https://www.amazon.ca/gp/aw/d/B001DCC1JC?psc=3D1&ref=
=3Dppx_pop_mob_ap_asin_image&tag=3Dmshop-android-rogers-all-all-all-pre=
-ca-20#" style=3D"text-decoration-line:none;color:rgb(0,113,133);width:48px=
;height:48px;outline:0px!important"><i style=3D"width:36px;height:36px;disp=
lay:block;background-color:rgba(255,255,255,0.8);background-repeat:no-repea=
t;background-position:center center;border-radius:18px"></i></a></div></div=
><div style=3D"width:384.19px;margin-bottom:1.6rem!important"><div style=3D=
"width:384.19px;margin-right:0px;text-align:center!important;float:left;min=
-height:0.1rem"><div style=3D"margin:0px"><div style=3D"width:412.19px;heig=
ht:400px"><ol style=3D"margin:0px;color:rgb(17,17,17);padding:0px;list-styl=
e-type:none;height:400px;white-space:nowrap;letter-spacing:-4px;width:824px=
"><li style=3D"list-style:none;margin:0px;vertical-align:top;text-align:cen=
ter;width:412px;min-height:100%;display:inline-block;white-space:normal;let=
ter-spacing:normal;height:400px"><a href=3D"https://www.amazon.ca/gp/aw/d/B=
001DCC1JC?psc=3D1&ref=3Dppx_pop_mob_ap_asin_image&tag=3Dmshop-andro=
id-rogers-all-all-all-pre-ca-20#" style=3D"text-decoration-line:none;color:=
rgb(0,113,133)"><div style=3D"display:table;width:411.81px;height:400px;pad=
ding:0px 10px"><div style=3D"display:table-cell;vertical-align:middle"><div=
style=3D"height:400px"><img alt=3D"Standard Motor Products V408 PCV Valve"=
src=3D"https://images-na.ssl-images-amazon.com/images/I/41IDhq%2BMwgL._AC_=
SY1000_.jpg" height=3D"px" width=3D"px" style=3D"max-width:100%;border:0px;=
vertical-align:middle;max-height:100%;height:203.636px;width:392px"></div><=
/div></div></a></li><li style=3D"list-style:none;margin:0px;vertical-align:=
top;text-align:center;width:412px;min-height:100%;display:inline-block;whit=
e-space:normal;letter-spacing:normal;height:400px"><a href=3D"https://www.a=
mazon.ca/gp/aw/d/B001DCC1JC?psc=3D1&ref=3Dppx_pop_mob_ap_asin_image&=
;tag=3Dmshop-android-rogers-all-all-all-pre-ca-20#" style=3D"text-decoratio=
n-line:none;color:rgb(0,113,133)"><div style=3D"display:table;width:411.81p=
x;height:400px;padding:0px 10px"><div style=3D"display:table-cell;vertical-=
align:middle"><div style=3D"height:400px"><img src=3D"https://images-na.ssl=
-images-amazon.com/images/I/218QpkQxa3L._AC_SY1000_.jpg" alt=3D"" style=3D"=
max-width:100%;border:0px;vertical-align:middle;background:0px 0px !importa=
nt;max-height:100%;width:392px;height:347.518px"></div></div></div></a></li=
></ol></div></div></div></div><div style=3D"width:384.19px"><div style=3D"w=
idth:384.19px;margin-right:0px;margin-bottom:0.8rem!important;float:left;mi=
n-height:0.1rem"><div style=3D"margin-bottom:1.3rem;text-align:center!impor=
tant"></div><div style=3D"line-height:0;text-align:center!important"><ul st=
yle=3D"margin:0px;color:rgb(17,17,17);padding:0px;border:none;width:384.19p=
x;line-height:0;height:10px"><li style=3D"list-style:none;margin:0px 0.3rem=
;background-color:rgb(148,148,148);display:inline-block;float:none;line-hei=
ght:1.6rem;width:0.9rem;border:0.1rem solid rgb(148,148,148);border-radius:=
2rem;height:0.9rem;padding:0px 0.5rem 0px 0px"></li></ul></div></div></div>=
</div><br></div></div><br><div class=3D"gmail_quote"><div dir=3D"ltr" class=
=3D"gmail_attr">On Sat., Jan. 30, 2021, 5:46 p.m. Bob Spidell, <<a href=
=3D"mailto:bspidell@comcast.net";>bspidell@comcast.net</a>> wrote:<br></d=
iv><blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left=
:1px #ccc solid;padding-left:1ex">Looks clean, Michael. I am considering si=
milar for my BN2 (but I plan to <br>
fab a plate with an elbow to replace the road draft tube). If you plug <br>
the valve cover vent, you'll have a 'system' similar to what I =
have on <br>
my BJ8, which is an updated version of the original Norman Nock design. <br=
>
This isn't really a PCV system, as the crankcase and valve cover will b=
e <br>
under continuous vacuum. I suspect some air is drawn in from the rear <br>
'seal,' which is not filtered but helps to alleviate the infamous H=
ealey <br>
bellhousing drip, and likely doesn't affect mixture all that much. If <=
br>
you leave the vent open--I'd put an air filter on it--you'll have a=
<br>
genuine PCV system as air will be constantly circulated through the <br>
crankcase and top end. This is what I plan to do, but my 100M is vented <br=
>
to the CAB, for which I have a large K&N filter on the intake duct in <=
br>
front of the radiator.<br>
<br>
Which PCV valve did you select?<br>
<br>
Bob<br>
<br>
<br>
<br>
On 1/30/2021 12:20 PM, Michael Salter wrote:<br>
> After months of deliberation I have constructed this PCV system for my=
<br>
> BN1.<br>
> The original road draft tube has been plugged just below the PCV valve=
<br>
> takeoff.<br>
> Of importance was that the system would be almost impossible to see <b=
r>
> without very close inspection.<br>
> I'm still trying to decide if I should plug the normal valve cover=
<br>
> vent or leave it open to serve as the PCV system intake.<br>
> Thoughts?<br>
><br>
> M<br>
><br>
<br>
_______________________________________________<br>
rer noreferrer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <=
a href=3D"http://autox.team.net/archive"; rel=3D"noreferrer noreferrer" targ=
et=3D"_blank">http://autox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank" rel=3D"noreferr=
er">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://autox.team.net/mailman/listinfo/heal=
eys</a><br>
<br>
s/michaelsalter@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">=
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com</a><b=
r>
<br>
</blockquote></div>
--000000000000a6d8e705ba2656d5--
--===============6460336572277146198==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============6460336572277146198==--
|