How did you get to the nut to weld it? Isn't it captive under the mount?
----- Original Message -----
From: Bob Haskell <rchaskell@earthlink.net>
To: gablegerry@netscape.net, healeys@autox.team.net
Sent: Sun, 17 Feb 2019 11:30:20 -0500 (EST)
Subject: Re: [Healeys] Shock Tower
Gerry,
I had one of the outside nuts break loose. I was able to screw a bolt
into the nut, pull the nut up against the plate and TIG weld it into place.
Cheers,
Bob Haskell
Austin Healey 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php
On 2/16/19 11:58 PM, gablegerry@netscape.net wrote:
>
>
> I removed the shock to replace the rubber rebound. One came off
> nicely and went back nicely. The other not so good. The back bolts
> were loose. When I took the shock off I discovered the nuts that
> received the bolts had release from the tower and were not
> connecting to the bolts. Any suggestion on how to fix are greatly
> appreciated!!!!
> Thank Gerry
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/tomfelts@windstream.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|