Gosh ... I'd never do a thing like that ... ?
________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Bruce Steele
<healeybruce at roadrunner.com>
Sent: Friday, August 10, 2018 1:51:45 PM
To: 'i erbs'; 'Roland Wilhelmy'
Cc: Healeys at autox.team.net
Subject: Re: [Healeys] Stuck generator
Which I totally forgot about!!! Thank you, Ira and Roland!
Bruce Steele
Brea, CA
1960 BN7
From: i erbs [mailto:eyera3000 at gmail.com]
Sent: Thursday, August 09, 2018 10:44 PM
To: Healey Bruce <healeybruce at roadrunner.com>
Cc: Healeys at autox.team.net
Subject: Re: [Healeys] Stuck generator
Did you loosen the bottom bolt on the adjustment arm?
Ira Erbs
Portland, OR
typos and artifacts are the fault of my phone
Seeking the collective wisdom. When I installed the generator on my newly
rebuilt engine last December it was a tight fit. Fine, I thought. After 1,500
or so miles, Saturday the generator light comes on. Upon inspection, the belt
is intact, but I can turn the generator pulley by hand and the belt has too
much play. No problem, just tighten it up. Wrong. With all my strength I
can?t get the generator to do more than barely wiggle with the mounting bolts
fully slackened. Thoughts on the best way to free up the generator?s up/down
movement? I?ll probably need to file down the ears a bit to make for an easier
fit.
Bruce Steele
Brea, CA
1960 BN7
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180810/f6733c05/attachment.html>
|