Carl
I have a similar issue on our BJ8. I found that there was no opening between
the heater box and the air plenum (hot air door assembly) at the front (engine
side) of the heater box. Obviously at some point that sheet metal had been
replaced as I understand there is normally a gasketted rectangular opening
between the two.
Other thoughts might be plugged heating coil airside or closed damper
(immediately upstream of the heater box under the dash).
Good luck!
Bob
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of ruvino at
ripnet.com
Sent: August 16, 2018 9:11 AM
To: healeylist
Subject: [Healeys] Heater fan
When I turn the fan on there is no air coming through the hot air door assembly
just above me feet. There is air coming from the fan and going into the heater.
Looked in the manuals and can?t see where or what the connection is.
I know the temps here have been 85F however this has become an ?intellectual?
problem that needs to be solved.
Carl
BN-4
1957
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180816/1dc79b39/attachment.html>
|