What is the CO content of the exhaust gasses when idling? The mixture
could be way to rich. Look at float height, wrong carb needles/jet,
leaking float valves, mixture adjustment, sticking pistons etc.
Kees Oudesluijs
Op 3-8-2018 om 01:14 schreef i erbs:
> Still have idle issues when engine is at running temp. Have replaced
> needle and seat, floats, fuel pump. Checked timing. Idles at 1000rpm.
> Then slowly drops and then stalls unless I pull choke out or rev the
> engine. Idles fine until engine gets hot. Hd8 carbs on BT7 engine with
> hot cam and bored +40.
>
> Ira Erbs
> Portland, OR
> typos and artifacts are the fault of my phone
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs
> at chello.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180803/b9aa2010/attachment.html>
|