Remove the frame from the car and take it to a windshield glass shop and have
them replace the seal. You will spend hours and hours and most likely ruin at
least one seal trying to install yourself.
David Nock
British Car Specialists
209-948-8767
www.britishcarspecialists.com
From: Tom
Sent: Wednesday, May 30, 2018 6:42 AM
To: Healey Mail List
Subject: [Healeys] Replacing BJ8 windshield seal
I'd like to replace rubber gasket between the windshield and body on my BJ8.
>From the archives, the job looks like a PITA. Is this job normally done with
>the windshield in place, and I slide the new seal in a little at a time?
Or should I remove the windowshield/frame from the car and install the new
seal? It looks like the windshield frame attaches to the body with three bolts
on either side... would removing the windshield from the car, putting the seal
in place with the windshield off, then putting the whole thing back on be
easier?
thanks,
Tom
--------------------------------------------------------------------------------
_______________________________________________
Archive: http://www.team.net/pipermail/healeys
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180530/2db5be9a/attachment.html>
|