Before pulling out the old cable, attach a wire at the firewall end as a
snake and then do the reverse with the new cable and pull it through.
Elton
On 5/19/2018 5:26 PM, ruvino at ripnet.com wrote:
> Trying again
> *Sent:* Thursday, May 17, 2018 1:03 PM
> *Subject:* choke cable
> Any advise on replacing the choke cable on a BN-4 (mine is on the dash
> running to a BJ-8 engine)?
> The cable goes through a "little" hole on the firewall hidden up above
> the heater box-almost impossible to get at.
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eschulz at
> frontiernet.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180520/42e455fa/attachment.html>
|