healeys
[Top] [All Lists]

[Healeys] Mating OD to gearbox

Subject: [Healeys] Mating OD to gearbox
From: austinhealeyslist at gmail.com (A H List)
Date: Wed, 21 Feb 2018 13:09:39 +1300
References: <3ee8a575-3fd2-7637-9be2-6d177958f075@comcast.net>
Have you tried shouting at it?

On 2/21/18, Bob Spidell <bspidell at comcast.net> wrote:
> Folks,
>
> I've successfully (hopefully) rebuilt and upgraded my OD and gearbox,
> but can't seem to get them to, uh, mate properly.  I had aligned the
> splines in the rear of the OD with my mainshaft before assembling the
> gearbox, but even then they didn't want to merge and, of course, after
> several tries the splines became misaligned (and I don't have a
> much-desired spare mainshaft).  I've done my best to get the splines
> aligned by prodding with a screwdriver but, even with them visibly
> aligned the two won't slip together. I tried dozens of test fittings,
> and got them to join one time, but didn't have the pump can or gasket
> installed, so that was for naught.  Any suggestions?
>
> TIA,
>
> Bob
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/austinhealeyslist at gmail.com
>
>

<Prev in Thread] Current Thread [Next in Thread>