healeys
[Top] [All Lists]

[Healeys] PBR brake servo

Subject: [Healeys] PBR brake servo
From: s.hutchings at rogers.com (Stephen Hutchings)
Date: Fri, 2 Feb 2018 15:57:51 +0000 (UTC)
References: <CAFBXTkKNU2uidudH6jqC41xZy8a0UAe11NpnzTUQScJ1C82k1w@mail.gmail.com> <16153c16be9-1dae-1b15f@webjas-vac230.srv.aolmail.net> <CAFBXTkJxMFGNwS4N-65DKXckKBmf9OPW6DuWZgLNUwVtF-9eLw@mail.gmail.com>
Interesting...I'll have to check the number on my Bj8's PBR, because, right 
from the start, I've always found that I needed more pedal effort than my 
memories of the old Girling. It takes a bit of getting used to in the spring, 
after I've been driving modern cars all winter.Don't feel like going out to the 
unheated garage and crawling under the car right now- Toronto's gone into deep 
freeze once more.
Stephen- BJ8

      From: Alan Seigrist <healey.nut at gmail.com>
 To: Keith Pennell <llennep at verizon.net> 
Cc: Healey list <healeys at autox.team.net>
 Sent: Thursday, February 1, 2018 8:24 PM
 Subject: Re: [Healeys] PBR brake servo
   
On my BJ8 it does provide a bit more assist than the girling, but I got used to 
it.? I find it still quite good and giving a good feel for braking.
Best,
Alan
On Fri, Feb 2, 2018 at 7:44 AM, Keith Pennell <llennep at verizon.net> wrote:

Replaced the original with the PBR unit a year ago.? I find the brakes now to 
be a bit grabby.? Cannot get smooth braking on a consistent basis.? I will note 
that I drive the car very little so there could be other issues in the system.? 
Have not replaced the hoses in quite a while.


-----Original Message-----
From: Alan Seigrist <healey.nut at gmail.com>
To: Simon Lachlan <simon.lachlan at homecall.co.uk>
Cc: Healey list <healeys at autox.team.net>
Sent: Thu, Feb 1, 2018 6:33 pm
Subject: Re: [Healeys] PBR brake servo

VH 44.? the PBRs are nice units.
On Tue, Jan 30, 2018 at 12:18 AM, <simon.lachlan at homecall.co.uk> wrote:

One of these has turned up, a VH40. Comes off a stalled BJ8 project. Never 
used.I thought we needed VH44s in 3000s. It?ll be to replace the (factory 
fitted) Girling in my Mk II BT7 which is overdue another rebuild or 
retirement.Which is correct for my car??Thanks,Simon.
______________________________ _________________
Archive: http://www.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/ listinfo/healeys





______________________________ _________________
Archive: http://www.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/ listinfo/healeys




_______________________________________________
Archive: http://www.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys




   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20180202/52bbb180/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>