Hi
Brake shoes are held in place by springs of that form. It is to be mounted
behind the shoes, thus ?pressing? them against the back plate, or rather a post
fitted to the back plate. It looks quite small, so I suspect it belongs to a
Sprite.
Best regards, Per
Skickat fr?n min iPhone
> 21 jan. 2018 kl. 17:19 skrev Michael Salter <michaelsalter at gmail.com>:
>
> I have been sorting through a couple of buckets of fasteners that I have had
> plated and come across this spring.
> <image.png>
>
> I'm sure I have seen it on a Healey somewhere but cannot remember where.
> It isn't from the hand brake rods, nor the roadster door latch.
> It is very stiff, I and only extend it about 1/4" by hand pulling.
> The wire diameter is around 1/16".
> Any ideas anyone?
>
> M
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/per at
> schoerner.se
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180121/ddd02a6b/attachment.html>
|