[Healeys] fulcrum pin cotter pins too short

[goldengt at cal.net (goldengt at cal.net)]

FYII don't know where I got a short cotter pin for the fulcrum pin from, but it 
was short enough that grease came out. I have figured out that those cotter 
pins have to protrude about 1/4 inch above the king pin boss and then tightened 
a lot while moving the king pin around to get them centered.I was having play 
at the wheel because the cotter pin wasn't really tight and blaming worn 
fulcrum pins and king pins. I replaced the short pins with old long ones and 
all is well again.Ken Freese65 BJ8
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20180105/7e022bcf/attachment.html>