I have learned the secret from two members (Dave Porter and Perry): Heat
the rubber piece and stretch the top so as to form an arc where the
windshield frame is radiused.
Best--Michael Oritt
On Sun, Dec 31, 2017 at 7:07 PM, Bob Spidell <bspidell at comcast.net> wrote:
> It's been a while since we did ours but, like Michael says it's pretty
> straightforward. You fit the glazing seal to the glass, the bottom should
> be one-piece and U-shaped, and the top is a separate piece. We didn't have
> any trouble with the seal we got from Moss; it's wider than you need but
> you trim the excess at a 45-deg angle from the frame pieces to the glass
> (be careful not to score the glass). The top seal and the top of the 'U'
> should be cut at 45-deg angles to each other at the corners as well.
>
> I wrote Fourintune (Kay?) to ask for their secret but, for some reason,
> their replies didn't come through and she gave up after a couple tries
> (maybe it's one of those ancient, mythical things that should never be
> revealed). You could write them and try again, and if you do get a reply
> please let us all know (and I hope we don't all die under mysterious
> circumstances shortly thereafter).
>
> Happy New Year All!
>
> Bob
>
> On 12/31/2017 1:16 PM, Michael Salter wrote:
>
> It is pretty straight forward Michael however I have had difficulty
> finding the correct thickness of Everseal glazing strip.
> The other trick is to ensure that you replace the series of little wooden
> blocks top and bottom between the seal and the frame because if you omit
> them the top bow will never meet the frame in the center.
> Don't ask me how I know :-)
>
> Michael S
>
> On Sun, Dec 31, 2017 at 1:17 PM, Michael MacLean <rrengineer.mike at att.net>
> wrote:
>
>> I now have my windscreen pieces re-chromed, a new Triplex piece of glass
>> and the rubber glazing. Is there any tutorial on how to put the windscreen
>> together correctly, video or otherwise?
>> Mike MacLean
>>
>>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/michael.oritt at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171231/ae6873e2/attachment.html>
|