Kees,
The length of the Austin-Healey OD switch is 14.5 mm. The threads are
close to 16-2 mm; probably 5/8"-13.
I haven't checked, but I would think that the flats on the lever socket
would be hardened. Current thinking is to leave it alone.
Cheers,
Bob Haskell
AHCA 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php
On 12/30/2017 07:06 AM, Oudesluys wrote:
> The top cover is thick enough for cutting the thread for the switch. Use
> a fibre washer to even out the surface, not critical. There is barely
> any load on the switch so one or two threads will be fine. You can fit a
> spacer plate on the gear lever socket using Araldite or fix it with two
> small screws with a sunken head. Secure the screws with Locktite. The
> cover plate should be a bit taller than the surface on the socket as the
> arc over which it will move is bigger.
> A similar switch with a longer nose (I think) can be found on the
> gearbox of a Sunbeam/Hillman/Humber/Jensen-Healey 4sp box. I can check
> if you let me know the dimensions of your switch (preferably in mm) as I
> have a few lying about if I am not mistaken.
> Kees Oudesluijs
>
> Op 29-12-2017 om 19:01 schreef Bob Haskell:
>> Listers,
>>
>> Anyone run across a center shift gearbox top cover fitted with a
>> reverse light switch, opposite the overdrive 3-4 switch?
>>
>> See the attached image.? The gear lever socket has the second flat to
>> engage a reverse lamp switch, but there are a couple of issues.? The
>> top cover flange doesn't have the boss for the switch (you can see the
>> boss on the OD switch between the fiber washer and the flange, and on
>> the inside), so it's thinner.?? The flange is also farther away from
>> the gear lever socket. Compare the two flanges to the two screws that
>> hold the gear shift lever in place.
>>
>> So I'd have to build up the inside of the flange and machine the
>> outside of the flange to move the switch far enough inboard.
>>
>> Just thinking out loud.
>>
>> Cheers,
>>
>> Bob Haskell
>> AHCA 3000 MkI registrar
>> http://www.ciahc.org/registry_3000mk1.php
>>
>>
>> _______________________________________________
>> Support Team.Nethttp://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive:http://www.team.net/archive
>> Forums:http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/coudesluijs
>> at chello.nl
>>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell
> at earthlink.net
>
|