Bj8 was running well when I noticed the distributor was a little loose. Removed
the distributor everything was fine, so put it back in, but then could not get
the car to start. Not sure what happened. Had to turn the distributor to
extreme right to get it to even fire. Checked the archives and found Rich C
advice on moving the advance back by using a 5/16 bolt screwed it into the
gears. Once I put the screw in, I could not get the gears to move. Need your
help on what I need to do to get back on the road.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171202/6f56acf2/attachment.html>
|