Gents:
I definitely got ?chalky cheese? Noltecs! At least for the rear spring eye and
front upper trunion bushings. The lower A ? arm bushings are still on the car,
and what can be seen still looks okay. The problem is that not much can be
seen of them ? they are mostly hidden by the A ? arm mounting pockets on the
frame. Under the circumstances, I don?t trust them and will replace them ?
with rubber ? this winter. At this point, all I?m doing is attempting to see
if there are better quality rubber bushings out there It appears not ? looks
like everyone is selling the same product ? probably only one manufacturer.
One commercial Austin ? Healey restoration shop has indicated that they have
not had any trouble with rubber bushings in the last few years. They have also
indicated that they are leery of urethane suspension bushings for Healey?s ?
material deterioration, squeeks, harsh feeling ride, and frame cracks from the
harder ones.
Don ? a lot of people here have used the Polybush brand from AH Spares in the
UK ? other suppliers probably carry them as well. Most people have not had
rouble with them, a few will change back to rubber because of the harsher ride
feel with urethane (polyurethane). As I recall, the rear spring shackle
bushings installed on my BJ8 are Polybush brand ? blue urethane. When we had
the springs out recently to do the front eye bushing replacement, we
re-installed the shackle bushings ? not a thing wrong with them.
I?ll be ordering up a set of rubber front bushings for the BJ8 soonish, and
will do the work over the winter. Pain in the butt to have to re & re the
front end again so soon, but that?s the way these things go.
As a matter of interest, my tri-carb ? a very original and unmolested ( gold
level concours car) car ? has all of it?s original rubber suspension bushings
still installed. We keep close watch on everything, but so far it?s all okay ?
still rides and handles quite well at approx. 100 K miles. Amazing! The only
thing that was changed were the front roll bar mounting pin bushings, which
eliminated the almost monthly replacement of the rubber ones. They?re still
there after 20 or so years.
Earl Kagna
Victoria, B.C.
BJ8, BT7 tri-carb
From: Chris Dimmock [Healey]
Sent: Wednesday, November 15, 2017 3:34 PM
To: rrengineer.mike at att.net ; Healeys
Subject: Re: [Healeys] 28% OD with 3.54 rearend
Hi Mike,
Noltec bushings - its a long story, but here's a short background.
The guy who pretty much pioneered urethane suspension bushings here in
Australia was Greg Nolan.
His first business was Nolathane. Their bushings were red in colour, and this
was the early 1990's
He sold that business, and started again in the early 2000's, called himself
Noltec, and made Blue and/or black busings.
Being a long time BMC sportscar racer - he didn't mind making things like
Healey bushes - because he cared and was an enthusiast himself.
He sold thousands more e.g. Mazda MX5 Miata bushings than Healey - but he's an
enthusiast, and it wasn't all about the money.
Nolathane still make bushings - but they don't/ won't make them for Healeys
anymore because theyr'e more of a corporate, bottom line focussed enterprise.
Ok - thats the history lesson over.
So in 1998, the only bushings available were Nolathane red ones. They did many
bushings for Healeys - but not all of them - you couldn't do all the bushings
on a BJ8 all in urethane
My car still has some red Nolathane bushes in e.g. the front wishbones, and
they are still fine.
i also have some new old stock Nolathane which have sat in a drawer for 20
years - they are fine too.
Photo attached
When Greg started Noltec, he made all the same Healey bushings that Nolathane
made, plus he made the ones Nolathane didn't.
Here's the weird part. SOME of the Noltec bushes turned to a chalky cheese
within about 5 - 6 years.
Some others are fine.See Pics
Over the past 19 years, I've replaced Noltec engine and gearbox mounts, rear
spring and rear shock bushes (which turned to chalky cheese).
Some I've just had made in graphite impregated nylon, rather than urethane.
Yet - some old Noltec ones are still good.
Here are some pics of packets that have sat in the same drawer - out of UV
light - for 19 years.
Red is nolathane. Blue, and chalky white cheese are Noltec.
So - I don't know. Some are fine - some aren't.
If they are still blue, they are fine., The red ones are fine. But some turn to
chalky cheese.....
BTW, when I replaced my engine and gearbox mounts with Urethane, in 2000, the 2
year old brand new rubber ones fitted in 1998 were delaminated and split.
So the Urethane outlasted the rubber that was available in 1998..
Best
Chris
?
PS the white ones can be crumbled like old cheese between 2 fingers.....
On Thu, Nov 16, 2017 at 4:18 AM, Michael MacLean <rrengineer.mike at att.net>
wrote:
Chris,
How are your Noltec bushings holding up? I only ask as someone on the
list is having a problem with them disintegrating in short order.
Mike MacLean
Sent from Yahoo Mail on Android
On Wed, Nov 15, 2017 at 7:18 AM, Chris Dimmock
<austin.healey at gmail.com> wrote:
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/rrengineer.mike at att.net
--------------------------------------------------------------------------------
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171116/1155c950/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: noltec-47126-bushes.JPG
Type: image/jpeg
Size: 113841 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171116/1155c950/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: noltec-45109-bushes.JPG
Type: image/jpeg
Size: 103995 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171116/1155c950/attachment-0001.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nolathane-45109-bushes.JPG
Type: image/jpeg
Size: 108721 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171116/1155c950/attachment-0002.jpe>
|