Thanks for the quick response!
Internal
Thanks to:
Bob Haskell
AHCA 3000 MkI registrar
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob
Simmen
Sent: Friday, September 8, 2017 8:50 AM
To: healeys at autox.team.net
Subject: [Healeys] Generator to Alternator conversion - BJ8
I am converting my 67 BJ8 Healey from a generator to an alternator. A 1980
MGB alternator will be used because it has the required 3/8 pulley (and
because I currently have one that is new).
My questions is, does the 1980 MGB alternator have an internal voltage
regulator or does it use an external regulator? If internal, I will need to
change the wiring. If external, am I correct that no wiring changes will
need to be made, other than to insure the BJ8 has been converted to a
negative ground.
Thanks in advance!
Bob
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170908/047d7eab/attachment.html>
|