healeys
[Top] [All Lists]

[Healeys] Healey BN1 Head gasket

Subject: [Healeys] Healey BN1 Head gasket
From: coudesluijs at chello.nl (Oudesluys)
Date: Wed, 30 Aug 2017 16:14:06 +0200
References: <CAKjtSfjt_2_6g_SVQZhwv9esFDaCghXNsmUrSfmQ0yM+9yvpZQ@mail.gmail.com> <561cce9d-3cd5-9dbc-05cb-d8ce4f6fc775@porterscustom.com>
The origin of the damage looks very much like a cold engine forced to 
deliver peak performance.
Always heat up any engine slowly by driving normally until the oil 
pressure starts to drop a bit, i.e. usually around 15 minutes.
Another cause may be running the engine without thermostat.

Kees Oudesluijs.


Op 30-8-2017 om 14:55 schreef David Porter:
>
> Not at all uncommon on the? 4 cyl engines. Easy solution is to have 
> copper/steel/whatever O-rings made to sit atop the regular head 
> gasket. I used to have Mordy Dunst at Gasket Works make them for me.. 
> Unsure if he is still in business. Typically I had them at .002-.003 
> in thickness. This allows a bit more sealing around the bores. Used a 
> smear of lube to hold them in position when dropping the head on. 
> Follow installation with a good coolant sealant (K-Seal) prophyactically.
>
> DaveP
>
>
> On 8/29/2017 10:46 AM, Wayne Schultz wrote:
>> Hello,
>>
>> ? ? ? ? ? ?My friend Bob had a problem with his Early BN1. The engine 
>> was rebuilt 2K miles ago or so and after several trips at speed on 
>> the highway cylinders 2 and 3 lost compression. The picture explains 
>> what we found when we pulled the head. The head has a 4 thousandth 
>> warp between cylinders 2 and 3 and a 2 thousandth warp between 
>> cylinders 1 and 2. The engine was rebuilt by the previous owner so we 
>> don't know what was done , but the head looks like it was milled 
>> before. Bob ?had planed on installing a aluminum head soon anyway so 
>> not a big deal. I thought people would like the picture.? We are 
>> installing a Denis Welsh head with new hardware and their steel head 
>> gasket.
>>
>> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?Wayne
>>
>>
>> _______________________________________________
>> Support Team.Nethttp://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive:http://www.team.net/archive
>> Forums:http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/frogeye at 
>> porterscustom.com
>>
>
> -- 
> Dave Porter Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM 
> 87107 505-352-1378 Go HERE: my world www.porterbikes.com/
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs 
> at chello.nl
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170830/fbedf885/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>