I'm using the AH Spares kit to convert to alternator. The instructions say to
connect the new Lucar connectors to the brown and yellow and the brown and
green wires which were connected to the generator.
The thing is, they say to connect the large connector to the brown and green
wire (which was on a small connector, and is a smaller gauge of wire), and the
brown and yellow to the small connector (previously having a larger connector
and a larger gauge of wire).Now, because I'm going to negative ground, is the
load on the wires to the alternator reversed as well- hence the swapping of
connector sizes.Hope this is clear- it just feels strange putting the big
connector on the small wire, and vice versa.
ThanksStephen, BJ8
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170826/423dec47/attachment.html>
|