| Subject: | [Healeys] Carb Adjustment Help Requested - BJ8 MkIII |
|---|---|
| From: | engl at accesscomm.ca (Bob England) |
| Date: | Mon, 14 Aug 2017 19:42:36 -0600 |
| References: | <E981DFF5-7A71-4BD2-818C-171E416C7133@cox.net> <02d101d3147a$6891d630$39b58290$@ca> <9f2ee5d9-5ad8-c50b-fd83-47e498b81a36@porterscustom.com> <4a53278d-cf53-d400-9e68-600553ed1623@comcast.net> <009e01d314b8$794db4b0$6be91e10$@ca> <75e70de5-c378-a5ee-7b37-887c90ee63ac@comcast.net> <000301d3152b$7547c090$5fd741b0$@ca> <cca7769d-9c80-b258-f4a6-f6b478bf8a3e@comcast.net> <003a01d3152f$99923b20$ccb6b160$@ca> |
Hello all, and thanks again for everyone's insight on my issue.
In answer to the questions put to me over the last little while:
Needles are standard UH at 0.125" base dia.
The needles do show signs of slight rubbing in the 3/4" closest to the
base (i.e. most common throttle settings).
Jet sits about 1.6mm below the throttle bridge at its maximum height.
Gas level in jets - tough to tell, but below the level of the top of
the jet when jet is pulled down all the way.
Thanks again.
BobE
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [Healeys] Carb Adjustment Help Requested - BJ8 MkIII, John P. New |
|---|---|
| Next by Date: | [Healeys] Hugh Healey, Patrick & Caroline Quinn |
| Previous by Thread: | [Healeys] Carb Adjustment Help Requested - BJ8 MkIII, John P. New |
| Next by Thread: | [Healeys] Starter motor query, Paul Leeks |
| Indexes: | [Date] [Thread] [Top] [All Lists] |