That is what the English videos indicate. I have some 1/4" foam to use and also
some other filler. Not sure Moss has any tech videos to help with this; I have
seen a few pro jobs done with these seats and they came out awesome but it
seems a DIY could do as well.
I am trying to get the nerve to try it.
I have done a few trial fits and bought a new bag of clips but gluing is making
me nervous as it is generally non reversible
Regards,
Richard C
My upholsterer at the time slid foam (about ?? thick) cut to size into the
pockets- used a ruler to assist getting them into place
John Rowe Qld Australia
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Richard
Collins
Sent: Friday, 28 July 2017 10:29 AM
To: BJ8Healeys
Cc: Healey List
Subject: Re: [Healeys] Front leather seat installation
I am redoing the seats on my BN7 with a Moss kit. The old original bottom
pleats were full as Steve notes below but the new kits are not.
Neither are leather.
Regards,
Richard C
It has been a long time, but as I recall the pleats in the seat bottom were
pre-sewn and filled out when I installed the cover, but have flattened out over
the last 18 years of carrying my butt around. I may be wrong. The pleats in
the rear seat pans are still full.
Steve Byers
HBJ8L/36666
BJ8 Registry
AHCA Delegate at Large
Havelock, NC
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170728/e7a75c84/attachment.html>
|