Lawrie,
Also a worm drive hose clam work well to hold the rollers in place. And if you
loosen th4e clamp slightly, you can slide the whole assembly into the housing
without scattering the little buggers all over the place.
Ed
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Laurie
Wilford
Sent: Friday, June 23, 2017 8:35 PM
To: ruvino at ripnet.com; healeylist
Subject: Re: [Healeys] overdrive part
I happen to have one handy. It is 1/8" thick, 0.125
A rubber band works well to keep the rollers in the unidirectional clutch :)
Laurie
Sent from my Galaxy Tab(r) A
-------- Original message --------
Date: 2017-06-23 5:55 PM (GMT-05:00)
Subject: [Healeys] overdrive part
Can anyone tell me the thickness of the bronze thrust washer, clutch to
annulus, Moss part number 866-620?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170625/11c01da5/attachment.html>
|