I installed a complete set of his brake lines and clutch slave extension.
They fit perfectly. The Slave extension proved to be a lifesaver in bleeding
the clutch. Unfortunately, it is my understanding that after Doug passed on
to be with Donald, his heirs mistakenly junked his jigs, etc. so no more can
easily be manufactured.
John Sims
Aberdeen, NJ
www.healey6.com
-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob
Spidell
Sent: Friday, May 12, 2017 12:29 AM
To: ggilliam at usol.com; Healeys
Subject: Re: [Healeys] Clutch bleeder?
Here's a shot of the business end. Sorry, not gonna pull my transmission
cover to get the other end ;) ... it's just a fitting into the clutch slave.
This was produced by the late Doug Reid, aka 'Mr.
Finespanner.' I think the best part was the simple but rugged bracket that
was bolted to the bellhousing.
Discussion here: http://www.ahexp.com/phorum/read.php?3,184927
Bob
On 5/11/2017 1:11 PM, ggilliam at usol.com wrote:
>
> A while back there was information on a bleeder line extension for
> the clutch slave cylinder...does anyone know the particulars of the
> construction, such as length and fittings required, a picture perhaps?
>
> Also, the side curtains for my Longbridge BN4 have just been laying
> in the boot for many years..would someone have a picture of the
> storage bag they should be held in? The front brackets on mine look
> home made..I'd like to see what they should really look like. Where
> the brackets removed for storage so the side curtains could lay flat
> together?
>
> Thanks for the help,
>
> Gordy
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual
> donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net
>
>
|