Your sills sound like normal UK replacement ones - none of them fit, and
many are curved so they do not give an even door to sill gap. I had to cut,
weld and lead mine to make the raised portion line up with the door, and a
friend just gave up with UK sourced ones and ordered two from Kilmartin
which were much better.
_____
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Craig
Cooper
Sent: 11 April 2017 17:09
To: healeys at autox.team.net
Subject: [Healeys] Do 2+2's Have Longer Doors?
I'm finishing up on metalwork on a BN7 and replaced the outer sills with
ones sourced through Moss, but I believe they came from AH spares. To make
them fit my car, I had to section them by about 5/8" as the raised portion
that goes under the door was at least that much longer than the door and
desired door gap. Not a big deal to do, but has me scratching my head. The
bottoms of my doors are a hair over 30-1/2", if anyone with a BN4 or BT7 and
a tape measure wants to check theirs and report.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170412/02fc27ce/attachment.html>
|