After removing the CAB and carbs for rebuilding I noticed an unconnected
wire and an open terminal on the electrical lighting/flasher box. The wire
is purple/green and the terminal is the topmost one on the rear side of the
box--there is no no wire going to this terminal. The wire comes out of a
small sub-harness along with a yellow/brown and green/yellow wire, both of
which are connected to terminals on the rear side of the box.
The only significant change from stock wiring is that I have electrified
the rear reflector pods and use them for turn flashers instead of having
the one light handling side/brake/turn functions, but I cannot see that
this correlates with having an open, disconnected wire at the control box
end.
The screw to the open terminal was loose, leading me to believe that the
wire in question was connected to it, but since all of my flashers, side
and brake lights are functional I thought I should try to find out the
wire's function before reconnecting it.
Best--Michael Oritt
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170215/5c142b86/attachment.html>
|