--===============1232356076423665669==
boundary="_154794EC-8112-4243-9251-F4D3CAA1C71D_"
--_154794EC-8112-4243-9251-F4D3CAA1C71D_
Content-Transfer-Encoding: quoted-printable
Hi John,
The fact that all the indicator bulbs illuminate at the correct times indic=
ates to me that everything is wired correctly and that the relay box is wor=
king correctly.
I would suspect that the current draw of the RHS bulbs is slightly differen=
t to that of the LHS bulbs.
The flasher units are very sensitive to current draw and won't flash or fla=
sh very quickly when the draw is not correct.
First check that the lamps are wired correctly with the higher current bulb=
s being used for the signals / brake lights.
Next try putting the LHS bulbs in the RHS to see if things change.
A word of caution....be very careful to avoid shorting the flasher output s=
ide to ground.... They are delicate units and it is easy to "let the smoke =
leak out".
Michael S
BN1 #174
-----Original Message-----
From: "John Rowe" <jarowe@westnet.com.au>
Sent: =E2=80=8E27/=E2=80=8E02/=E2=80=8E2016 2:47 a.m.
To: "Healey List" <healeys@autox.team.net>
Subject: [Healeys] Indicator fault
Hi All
I am looking for some wisdom about an indicator problem. Unfortunately the =
wisdom in my garage is not up to the task.
My left hand indicator works perfectly.=20
My right hand indicator lights both front and rear lights but does not blin=
k.
I have followed the trouble shooting guide in the Workshop Manual but it do=
es not cover this situation.
The flasher can appears to be OK as the LHS works normally.
I have connected the RHS wires of the Stop light relay as per the Workshop =
manual trouble shooting guide and there is no change.
I am at a lost at to what the problem is and the appropriate solution.
As all ways any help would be appreciated.
Regards
John Rowe
Perth
Western Australia
1959 3000 BT7=
--_154794EC-8112-4243-9251-F4D3CAA1C71D_
Content-Transfer-Encoding: quoted-printable
<html><head>=0A=
=0A=
<meta http-equiv=3D"content-type" content=3D"text/html; charset=3Dutf-8=
">=0A=
</head>=0A=
<body text=3D"#000000" bgcolor=3D"#ffffff"><div><div style=3D"font-family=
: Calibri,sans-serif; font-size: 11pt;">Hi John,<br>The fact that all the i=
ndicator bulbs illuminate at the correct times indicates to me that everyth=
ing is wired correctly and that the relay box is working correctly.<br>I wo=
uld suspect that the current draw of the RHS bulbs is slightly different to=
that of the LHS bulbs.<br>The flasher units are very sensitive to current =
draw and won't flash or flash very quickly when the draw is not correct.<br=
>First check that the lamps are wired correctly with the higher current bul=
bs being used for the signals / brake lights.<br>Next try putting the LHS b=
ulbs in the RHS to see if things change.<br>A word of caution....be very ca=
reful to avoid shorting the flasher output side to ground.... They are deli=
cate units and it is easy to "let the smoke leak out".<br>Michael S<br>BN1 =
#174</div></div><div dir=3D"ltr"><hr><span style=3D"font-family: Calibri,sa=
ns-serif; font-size: 11pt; font-weight: bold;">From: </span><span style=3D"=
font-family: Calibri,sans-serif; font-size: 11pt;"><a href=3D"mailto:jarowe=
@westnet.com.au">John Rowe</a></span><br><span style=3D"font-family: Calibr=
i,sans-serif; font-size: 11pt; font-weight: bold;">Sent: </span><span style=
=3D"font-family: Calibri,sans-serif; font-size: 11pt;">=E2=80=8E27/=E2=80=
=8E02/=E2=80=8E2016 2:47 a.m.</span><br><span style=3D"font-family: Calibri=
,sans-serif; font-size: 11pt; font-weight: bold;">To: </span><span style=3D=
"font-family: Calibri,sans-serif; font-size: 11pt;"><a href=3D"mailto:heale=
ys@autox.team.net">Healey List</a></span><br><span style=3D"font-family: Ca=
libri,sans-serif; font-size: 11pt; font-weight: bold;">Subject: </span><spa=
n style=3D"font-family: Calibri,sans-serif; font-size: 11pt;">[Healeys] Ind=
icator fault</span><br><br></div>=0A=
<font face=3D"Arial">Hi All<br>=0A=
<br>=0A=
I am looking for some wisdom about an indicator problem. Unfortunatel=
y=0A=
the wisdom in my garage is not up to the task.<br>=0A=
<br>=0A=
My left hand indicator works perfectly. <br>=0A=
<br>=0A=
My right hand indicator lights both front and rear lights but does=0A=
not blink.<br>=0A=
<br>=0A=
I have followed the trouble shooting guide in the Workshop Manual=0A=
but it does not cover this situation.<br>=0A=
<br>=0A=
The flasher can appears to be OK as the LHS works normally.<br>=0A=
<br>=0A=
I have connected the RHS wires of the Stop light relay as per the=0A=
Workshop manual trouble shooting guide and there is no change.<br>=0A=
<br>=0A=
I am at a lost at to what the problem is and the appropriate=0A=
solution.<br>=0A=
<br>=0A=
As all ways any help would be appreciated.<br>=0A=
<br>=0A=
Regards<br>=0A=
<br>=0A=
John Rowe<br>=0A=
Perth<br>=0A=
Western Australia<br>=0A=
1959 3000 BT7<br>=0A=
</font>=0A=
=0A=
=0A=
</body></html>=
--_154794EC-8112-4243-9251-F4D3CAA1C71D_--
--===============1232356076423665669==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============1232356076423665669==--
|