Chris,
In my BN1 the gauge reads empty when completely full. When it reads full, I
know that the tank is 3/4 full. And when it reads 1/4 full, I know that it?s
about getting empty. More or less I learned to live with that.
As you tell us this only happens, because the sender is installed 180 deg.
out?
Is there any way to tell from above without having to open the sealing
around the sender, if it is mounted in the wrong direction?
Reinhart
Reinhart Rosner
55 100 BN 1
Vienna ? Austria
-----Ursprüngliche Nachricht-----
Von: Healeys [mailto:healeys-bounces@autox.team.net] Im Auftrag von Chris
Dimmock
Gesendet: Sonntag, 07. Februar 2016 14:05
An: Charlie Schott
Cc: Steve B. Gerow; healeys@autox.team.net
Betreff: Re: [Healeys] Gas Gauge
Charlie,
Your sender unit is installed 180 degrees out.
Don't rely on the top of the sender unit for direction.
The float needs to sit inside the tank 'valley'.
I.e the float needs to face the front of the car, not the back.
Try it.
Best
Chris
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
ox.team.net
|