65 BJ8--------The adjusting ring on my steering column for allowing the
steering wheel to move in and out is VERY difficult to turn---have to use a
large clamp pliers. When I move it to where it should have loosened the
steering wheel will not budge-----turning it the other way and the wheel still
won't budge.
I'm thinking of pulling the steering wheel to check things.
Questions:
* Do I have to disconnect the wires and pull the column out to check things or
just the steering wheel.
* Is it possible to pull the steering wheel and move it slightly out of the
way without disconnection the wiring at the end of the tube.
* Anyone else had this problem and if so, what was the cause.
any other words of wisdom are really appreciated.
On another topic, I got a very pleasant surprise recently when I found a large
tire store very near me that had Vredestines in stock---had innertubes, knew
how to dismount, pull and add innertubes and how to balance wire wheels, and
allowed me to be with them the whole time--to add powder i the new tires and
tape to the wheels. I found this really rare.
They have many of the VRE 185/70 HR 15's in stock--------amazing to find this
service.
tom
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|