--===============4306702584612279804==
boundary="----=_Part_89696_1718758485.1435032850413"
------=_Part_89696_1718758485.1435032850413
Content-Transfer-Encoding: 7bit
Hi Listers,
Got the steps from the Archives on taking out the transmission to replace the
clutch and the benefits of replacing parts with a Bj8 clutch. This seems
straight forward, but once the clutch is out and new parts put in my workshop
manual talks about using an actuator and pumping the handle, selecting a
distance-piece code no. 7, and using a height finger over the centre pillar,
which I'm not clear about. Would appreciate information on these steps in the
process and tools that will help.
Greg Hill
BN6
------=_Part_89696_1718758485.1435032850413
Content-Transfer-Encoding: 7bit
<font color='black' size='2' face='arial'><font size="2">Hi Listers,<br>
Got the steps from the Archives on taking out the transmission to replace the
clutch and the benefits of replacing parts with a Bj8 clutch. This seems
straight forward, but once the clutch is out and new parts put in my workshop
manual talks about using an actuator and pumping the handle, selecting a
distance-piece code no. 7, and using a height finger over the centre pillar,
which I'm not clear about. Would appreciate information on these steps in the
process and tools that will help.<br>
<br>
Greg Hill<br>
BN6<br>
</font>
</font>
------=_Part_89696_1718758485.1435032850413--
--===============4306702584612279804==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============4306702584612279804==--
|